Step 4 – View & Record Session

After the initial software setup is complete and the goggles are on the wearer, please complete the following steps for a successful viewing session.

1. CENTER EYES IN VIEW

A. Center Left Eye

  • Press the number 1 on your keyboard to switch to the left eye master scene
  • Click and drag pupil of eye into the center of the preview window

B. Center Right Eye

  • Press the number 2 on your keyboard to switch to the right eye master scene
  • Click and drag pupil of eye into the center of the preview window
Center Eyes Both Keyed

C. Confirm Both Eyes Are Centered

  • Press the number 3 on your keyboard to switch to scene with both eyes displayed
  • If you need to modify one or both eyes, return to the master scenes by pressing 1 and/or 2 and update the individual eye positions until they are in the correct position.

Note:  You cannot adjust the layout or position of items in the 3 – BOTH scene.  You can only change the eye positions in the master scenes 1 an 2.

2. SCENE SWITCHING

Using your keyboard is fast and efficient during a session.  While in OBS, use the following keyboard shortcuts to switch quickly between the views.

Keyboard 1 1

1 – LEFT

This shows the Left camera and a label.  This is a master scene and is used to center the pupil for all other scenes.

Keyboard 2

2 – RIGHT

This shows the Right camera and a label.  This is a master scene and is used to center the pupil for all other scenes.

Keyboard 3

3 – BOTH

This shows the Left and Right camera centered in the display.

Keyboard 4

4 – ROOM

This shows the optional Room camera and a label.  This is a master scene and is used to center the room for all other scenes

Keyboard 5

5 – LEFT with ROOM

This shows the Left camera with the Room camera as a picture-in-picture in the upper-right.

Keyboard 6

6 – RIGHT with ROOM

This shows the Right camera with the Room camera as a picture-in-picture in the upper-right.

Keyboard 7

7 – BOTH with ROOM

This shows the Left and  Right camera with the Room camera as a picture-in-picture in the top center.

3. RECORDING

Control Start Recording 2

A. Click Start Recording

The button is in the lower right-corner in the Controls section

Control Stop Recording 2

B. Click Stop Recording

Click this when you are ready to stop recording.

4. VIEWING SAVED FILES

Show Recordings 2

A. Click File… Show Recordings

The menu is along the top of the screen.  Once clicked, a window will open showing you the location of your recordings.

Setup Complete 🙂